Trak18 SFT Hitting Mat

The Trak18 SFT Hitting Mat is a full-bay platform built around a real-fairway feel and joint-friendly shock absorption. Step onto it for the address position and swing without the harsh vibration most simulator mats put through your wrists and elbows.

Multi-layer build. - 1″ Teeline-style turf face — dense, plush blade structure across the full mat surface. Reads consistently to launch monitors and stays put under spike traffic. - Soft-foam core — high-resilience cushion that soaks up the sharp vibration of repeated strikes. Practice longer without flaring up. - Responsive ABS polyurethane mid-layer — flexes on contact and recovers between strikes so the surface stays uniform shot after shot. - Three compression slots in the base — let air evacuate underneath so the mat compresses naturally and snaps back. - Slip-resistant foam backing — holds position on hard floors, low-pile carpet, and tile without an underlay.

Replaceable hitting strip. The strike zone is a 28″ × 12″ cutout that holds a dedicated insert: the [Trak18 SFT Hitting Strip](/products/hitting-strip). When the turf face wears out — months or years in, depending on volume — slide in a fresh strip and the rest of the mat keeps going. No need to replace the whole platform.

Real tees, any height. Push a wood or plastic tee straight into the strip and adjust ride height by how deep you set it. No rubber tee inserts to chew through.

Two sizes. - 4 ft × 7 ft — fits residential bays where floor footprint is tight. 21 lb, 2.5″ stack height. - 4 ft × 10 ft — full commercial-bay platform with extra room behind the ball for stance work. 31 lb, 2.5″ stack height.

Both sizes share the same multi-layer build and the same 28″ × 12″ centre cutout — the SFT strip insert is interchangeable between them.